HOW TO IMPROVE THE HANDLING OF A SLOTCAR CHASSI...
HOW TO IMPROVE THE HANDLING OF A SLOTCAR CHASSI... > https://tinurll.com/2tl0Bf
Since their introduction several years ago, Slot Car Corner (SCC) Adjustable Front Axle Blocks have been used by numerous builders to improve the overall performance of their cars. For 1:32 plastic chassis cars, the front axle height plays an important role in car handling. An increasing number of 1:32 slot car manufacturers have also introduced chassis which incorporate an adjustable front axle feature.
Upgrade your factory RTR car with a slightly heavier brass version for improved handling and more flex. RTR cars are setup with the front axle in the 3\" wheelbase front axle hole. You can move the axle to the front hole for an extended 3.25\" wheelbase.
What we like to do is to leave the Car bodies loose on the chassis. To do this Lightly sand or scrap with a hobby knife the outer areas of the body, where chassis touch. Also Lightly sand the outer chassis to where they meet the body. Now find a drill bit that is one size larger than the original hole in the chassis where you removed the screws from and hand drill the Holes larger. This will allow for the Screws to not bite onto the edge of the chassis Hole. This setup can improve handling greatly.
Combined with ultra-high-performance tires, putting on a set of lightweight forged wheels will help reduce the car's unsprung weight and improve handling by reducing the work of the suspension in keeping your tires on the road over uneven surfaces at the track. 59ce067264
https://www.motopower.ch/forum/welcome-to-the-cars-forum/vilde-kaniner